
Commercial asphalt contractor serving Tempe, AZ
Tempe stopped growing outward in the 1970s. Almost every lot we bid here is a rebuild of pavement that has already carried traffic for decades, so we price it off a walk of your property and phase the work around your tenants.
Tell us about the property and we’ll get back to you with a free estimate.
Commercial paving in Tempe, AZ
Four kinds of work cover most of what a Tempe lot needs: paving when the surface is past saving, sealing while it still has life in it, patching where one area failed ahead of the rest, and striping to finish. One contract covers all four, from the bid to the final walk.

New asphalt over prepared and compacted subgrade, or a fresh mat over a lot whose base is still sound. Overlay costs less than removal and replacement, and it only works when the base holds.

Arizona sun drives the oil out of asphalt and the surface loses the flex it needs to carry loads. Sealing the surface and the cracks keeps water out of the base and buys years on pavement you already own.

Full depth patches where the base failed, skin patches where only the top mat did. The estimate tells you which one each area needs.

Stall lines, arrows, fire lanes and accessible stalls, repainted after paving or sealcoat, or restriped on their own once the lines have faded.
Not sure which your lot needs? The free estimate answers that, and it starts with an estimator walking the lot.

Family owned and operated
YSC is Young, Swenson & Cross Paving. We operate out of 1329 E Gibson Ln in Phoenix, near Sky Harbor and a short run up the 143 to most of Tempe. Your job is managed from the bid through the final walk.
Asphalt services in Tempe, AZ
Each one has its own page with the full detail. Here is what each is for, and when a Tempe lot needs it.

Grade, compact, and lay new mat where the base is gone or the property is being rebuilt. This is the full job, not a resurface, and it is what a lot needs once patching stops holding.
Asphalt paving details →
A new layer over the existing surface when the base still carries load. Less cost and less closed lot than removal and replacement, provided the base checks out first.
Asphalt overlay details →
Full depth removal and replacement where the base failed, skin patches where only the top mat did. We tell you which one you have instead of patching the same spot twice.
Asphalt patching details →
Cracks are how water reaches the base, and a wet base is what turns a crack into a pothole. Sealing them ahead of monsoon season is the cheapest work on this list.
Crack sealing details →
A commercial grade seal keeps water out of the surface and holds the flex that lets asphalt carry weight through an Arizona summer. It also puts the lot back to black.
Sealcoating details →
Potholes, failed drive aisles, the sunken ring around a drain, and the broken pad under a dumpster. Then we restripe the bays the work touched so the lot does not look half finished.
Parking lot repair details →Properties we serve
Apartments around campus, strip centers on Mill Avenue and Apache Boulevard, industrial and flex space along Priest Drive and the 101. Who parks on the lot changes the section thickness, the phasing, and the striping plan.
Private drives and resident parking, phased so nobody is blocked in, with a schedule and a notice letter the board can post.
HOA paving →High turnover parking near campus, carports and covered stalls to work around, and drive aisles that have to stay open for emergency access.
Apartment paving →Tenant parking that cannot close for a week. We run section by section, keep the storefront aisles live, and restripe to the layout you approve.
Retail center paving →Bus lanes, drop-off loops, and staff lots. Most of this work belongs in a summer or a break window, which means booking it months out.
School paving →Thicker sections, heavier loads, and turning trucks. Trailer traffic breaks pavement in ways passenger cars never will, and it needs to be built for that from the subgrade up.
Distribution center paving →Lots that sit empty most of the week and fill completely on one morning. That makes them straightforward to schedule around.
Church parking lot paving →
What is different about Tempe
Tempe is older and tighter than most of the Valley, and it keeps its own spec book. Six things that change how we bid work here.
Tempe is 40.2 square miles with Phoenix and Guadalupe on the west, Scottsdale to the north, Mesa to the east, and Chandler to the south. There is no land left to annex. Almost everything we bid here is a rebuild of pavement that has already been in service for decades, not a first pour on raw dirt.
Tempe publishes its own supplement to the MAG Uniform Standard Details and Specifications, alongside its Engineering Design Criteria. A bid written to MAG alone can still miss what Tempe wants on a detail, and that gap turns into a change order later.
Work that touches a public street, a sidewalk, or the right of way goes through Tempe’s permit process before a truck rolls. We pull it and schedule around the review time rather than quote you a start date we cannot hold.
The National Weather Service runs the monsoon from June 15 to September 30. Sealcoat and crack seal need dry pavement and a dry forecast, so that work gets pulled forward into spring or pushed to October. Paving and patching can run through it with the weather watched day to day.
Campus, Mill Avenue, and the retail centers along Apache and Rural do not have a slow week to hand you. We phase by section, keep the drive aisles and accessible parking open, and run nights where the tenant mix allows it.
Pavement built in the 1970s and 1980s often sits on subgrade that was never tested the way it would be today. When it fails it fails in the base, not the surface. The estimator reads the failed area on the walk, and if the base is still in question, coring goes on the quote as its own line item. That answer is the difference between a patch and a rebuild.
The bid
Three bids on the same lot come back thousands of dollars apart, and it is usually because they are not pricing the same work. Ours lists the scope line by line so you can hand it to a board or an owner and they can see exactly what they are buying.

Overall square footage comes off aerial imagery, and someone from YSC spot checks the measurements on the lot. That visit is what catches the drains, the dumpster pads, the soft corners, and the failed areas.
Square footage, depth, patch counts, stall counts, permit needs, and what is excluded. One number with no breakdown underneath it is not a bid you can compare to anything.
How the lot stays open, which sections run which days, and where your tenants park while we work. Phasing is most of the difference between a cheap bid and a real one.
The estimate
Every bid starts with an estimator walking the lot. We measure the lot, separate the places where the surface has failed from the places where the base has, check the grades around the drains, and note the striping and stall layout.
You get a written scope, not a verbal number.
It lists what is in the price and what is not, so you know exactly what you are approving.
Get a Free Estimate →
The process
Four stages, and you know who to call at every one of them. Click a stage to read it.
Experience
YSC has been paving the Phoenix metro for 25 years and Tempe sits in the middle of it. Our yard is off Gibson Ln in Phoenix, so a Tempe lot is a short run from the yard.

The main areas we cover inside Tempe, north to south. We work the rest of the city too, including the HOA and condo communities in between.
Garages, alleys and loading zones, phased so the storefronts stay open through the work.
The north edge of the city along the river, mixed-use lots and structured parking.
Campus parking that turns over all day, so summer and the break weeks are the realistic window.
Light-rail frontage and tight drive aisles. Anything touching the street needs a right-of-way permit.
Directly south of downtown, older residential streets with mature trees over the pavement.
East of downtown, long-established blocks where the drives and aprons have aged together.
West Tempe, older housing mixed with small commercial frontage and shared alleys.
Between Broadway and University, a mix of residential drives and small private lots.
A large South Tempe community with private drives and resident parking to phase around.
South Tempe off Warner Road, HOA drives and common-area parking on a maintenance cycle.
Tempe, Phoenix, Mesa, Chandler, Gilbert, Scottsdale, Apache Junction and the rest of the Valley.
See service areas →
Why YSC
Six things companies get from us on a Tempe job.
Long enough to see how a pavement section holds up through decades of Valley heat.
Laid out so an owner, a board or a management company can see what is being approved and sign off without a second walk.
The team that walked the lot and wrote the scope stays on the job while the work runs, so nothing gets lost in a handoff.
We bid to the MAG standard specifications and to Tempe’s own supplement and design criteria, so the detail matches what the city expects.
What is in the price and what is not. The exclusions are the part most bids leave off, and they are where the change orders come from.
Paving, overlay, patching, crack seal, sealcoat and striping in one scope, so nothing gets lost between two of them.
FAQ
If yours is not here, call (602) 254-7474.
It depends on whether the surface failed or the base did. Cracking that is still tight, faded color and a rough top are surface problems, and sealcoat plus crack seal handles them. Areas that flex underfoot, potholes that come back after patching, and cracks running in a pattern like broken pottery mean the base is wet or gone, and sealing those only hides them. If the walk doesn’t settle it, coring goes on the quote as its own line item.
Very little of it, and never all at once on an occupied property. We phase by section. Sealcoat needs the section it covers to stay clear of traffic for the rest of that day, patching frees a section back up the same day, and new mat needs longer before trucks run on it. The phasing plan and the day by day section map are in the bid, not decided on site.
Often, and on busy Tempe centers it is the better answer. It depends on the tenant mix, the residential neighbors, and what Tempe allows for the hours and the noise at that address. We check before we promise it rather than after.
It moves with the season. Spring and October are the busiest windows because that is when sealcoat demand stacks up, and school work is stacked into summer and break periods. Call with the property address and we will tell you the real window for your scope.
There is no honest square foot number that covers it, because the same lot prices differently depending on how much of the base has to come out, how many phases the property needs to stay open, and whether any of the work sits in the public right of way. What we will do is measure your lot, using aerial imagery for the overall square footage and spot checks on site, and give you an itemized scope with the exclusions on it, at no cost, so you are comparing real numbers.
Almost always because it is pricing less work. Look for the depth of the patches, whether removal and replacement is priced or only a skin patch, the striping counts, the phasing, and the exclusions. A bid with one number and no breakdown cannot be compared, and the missing scope tends to reappear as a change order.
No. The estimate and the written scope are both free, and so is the site walk.
Yes. We work with property managers, HOA boards and management companies regularly, and we can write the scope so a board can approve it in one meeting instead of asking for a second walk.
Work entirely inside your own lot is different from work that touches the public street, the sidewalk or the right of way, and the second kind goes through Tempe’s permit process first. Larger private site work can also fall under the city’s private development engineering review. We identify what your scope needs and pull it. Tempe’s Permit Center is at 480-350-4311 if you want to confirm anything yourself.
The MAG Uniform Standard Details and Specifications, plus Tempe’s own supplement to them and the city’s Engineering Design Criteria. That supplement is the part an out of area contractor tends to miss.
Heat is not the problem for paving, water is. Paving and patching run through the summer with the crews starting early. Sealcoat and crack seal want dry pavement and a dry forecast, and the monsoon runs June 15 to September 30, so that work is better in spring or from October on.
Yes. ADA striping is part of our striping work: accessible stalls, van accessible stalls, access aisles and the symbols that go with them. We lay them out to the plan you approve and show you any changes before we paint.
Service areas
Tempe is bordered on every side, which means a crew working here is minutes from four other cities. If you manage properties in more than one of them, one contract can cover all of them.

Our yard is here, off Gibson Ln near Sky Harbor, which is what makes Tempe a short run.
Phoenix paving →
Directly east of Tempe. Older lots on the west side, newer industrial toward the 202.
Mesa paving →
Tempe’s southern border. Heavy on office and tech campuses with large employee lots.
Chandler paving →
North across the river, where finish quality and how the lot looks carry extra weight.
Scottsdale paving →
Southeast of Tempe. Newer pavement on the whole, so much of the work here is maintenance timing.
Gilbert paving →
Apache Junction sits at the east end of the Valley, and the sun and the runoff are harder on pavement out there.
Apache Junction paving →
Related work
Most Tempe jobs need more than one of these, and one contract keeps the grades and the paving tied to the same plan.
Site clearing, cut and fill, subgrade prep and compaction, and drainage before any asphalt goes down.
A schedule rather than a scramble. Crack seal, sealcoat and striping on a cycle your budget can plan around.
Potholes, failed drive aisles and sunken areas around drains, repaired before they spread across the lot.
Crack sealing, sealcoating and patching that extend the life of pavement you already have.
Send us the property address and what is going wrong with it. An estimator will check the measurements in person and send you a written scope.
