The decision to have an asphalt driveway installed at your home is a financial investment. This financial investment should provide the highest quality of work and materials from the best Youngtown asphalt contractor. There is a process of laying down asphalt and a qualified asphalt contractor should follow this process so the homeowner gets the proper asphalt needed for their driveway.
The steps that are involved in laying down asphalt include:
- The ground needs to be strong for the asphalt to be structurally sound. The foundation may need to have stones added to the ground so it can provide a sturdy foundation. If the foundation has a soft grounding material or stumps and roots, then this all must be removed first, then stones can be added to the area.
- The foundation is one of the most important features of the asphalt. Gravel is added to the foundation to create the sub-base. The gravel will allow for drainage of water from the asphalt, along with providing support for the asphalt. The sub-base is rolled with a vibrating roller that will compact the sub-base. The compaction should be around two to three inches of sub-base thickness. The sub-base can’t be soft or unleveled, as this will affect the asphalt completely.
- The hot asphalt is now ready to be laid. The hot asphalt is laid on top of the sub-base, and then rolled evenly. The surface has a paver and roller go over the asphalt so the asphalt is distributed evenly and compacted at the same time. The edges are hand tamped at a 45 degree angle so it provides the support needed for the asphalt.
- The asphalt is laid and the crew will block off the asphalt so that nothing and no one is able to drive or walk on the asphalt.
The process of laying asphalt sounds pretty easy, but there is a lot of detail and hard work that goes into laying an asphalt driveway. Being an asphalt worker requires determination, craftsmanship, and dedication, as this is a hard and tedious profession, but the rewards are unlimited.
An asphalt contractor can do a regular sized driveway in two days. One day is used for getting the foundation and area ready for the asphalt and the second day is the actual laying of the asphalt. You will be able to walk on the asphalt 24 hours after the asphalt is completed. You can park and drive on the asphalt three days later. The process for asphalt is not quick, but the wait is worth it in the long run.